Discussion Use F-portF

** Although the F.Port is a non-inverted protocol by design, currently the signal is still coming out of the SmartPort (S.Port) pin on the receiver, ...

I'm using this exact setup, but on a matek f722se mini. Do get serial in cli and post it up. Or add some screenshots of your ports tab and receiver tab. I also ...

2020年6月6日 — With Sbus I got always the message sensor lost so I decide to switch the firmware to F-Port but I can't get any movement in the receiver tab.

2019年11月28日 — FPort works great, the only thing is RSSI didnt work with rssi_source set to AUTO. Had to manually set it to PROTOCOL and now i have RSSI :) ...

2018年11月23日 — F.Port是FrSky与Betaflight合作开发的一个新协议，它比现有的协议有不少的改进，具体可以看这里：The FrSky FPort Protocol由于可以一个条线既能实现 ...

The TD-MX does support F.Port, I use it on one of my helicopters. But it's almost certainly worth updating iNav anyway, as they've updated the F.Port ...

F.Port is a protocol running on async serial allowing 16 controls channels and telemetry on a single UART. Supported receivers include FrSky R-XSR, X4R, ...

2022年5月2日 — F.PORT, as sent from a FRSKY or a FRSKY-clone receiver, is an inverted signal (think of it like 1's and 0's voltages being swapped), just like ...

2020年12月22日 — I am not 100% sure what setting to do in INAV I have tried a few but none seem to work do I set INAV to F-Port 1 or 2 and is there anything else ...

2020年6月9日 — 只要到視窗右側，把Receiver Mode 接收機模式設定好，通道值就會出現。這裏，我用的是R-XSR 接收機，使用F.Port 協定，設定如下：. Receiver Mode：SERIAL ...